indian roller bearings suppliers

Spherical Roller Bearing

Product Specification

A spherical bearing is a bearing that permits angular rotation about a central point in two orthogonal directions (usually within a specified angular limit based on the bearing geometry). Typically these bearings support a rotating shaft in the [bore] of the inner ring that must move not only rotationally, but also at an angle.

Spherical bearings can be of a hydrostatic or mechanical construction. A spherical bearing by itself consists of an outer ring and an inner ring and a locking feature that makes the inner ring captive within the outer ring in the axial direction only. The outer surface of the inner ring and the inner surface of the outer ring are spherical and are collectively considered the raceway and they slide against each other, either with a lubricant, a maintenance-free or they incorporate a rolling element such as a race of ball-bearings, allowing lower friction. Spherical bearings are used in countless applications, wherever rotational motion must be allowed to change the alignment of its rotation axis.

Cylindrical Roller Bearing

Product Specification

Cylindrical roller bearings offer excellent resistance to instantaneous overloads and shocks.

They simplify assembly thanks to their detachable elements and allow, for certain types, axial displacement or low axial load, for other types.

Cages

The standard cage for these bearings is the polyamide cage which allows bearing operating temperatures of 120°C or 248°F (150° or 302°F peak). The standard cage for series 4 is in pressed steel. The machined brass cage is available on option. Large-dimension bearings are equipped with a machined brass cage. For special applications in which the synthetic material cage is unacceptable, a metal cage can be provided on request.

Capabilities

Loads and speeds

Cylindrical roller bearings are designed to

• Withstand radial loads
• Withstand moderate axial loads if the position of the shoulders on the rings allows them accept high speeds of rotation

Misalignment

Cylindrical roller bearings accept misalignment of about 0.06° thanks to the correction on the roller surface profile

indian roller bearings suppliers

Deep Grove Ball Bearing

Product Specification

A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races.
The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing races rotates it causes the balls to rotate as well. Because the balls are rolling they have a much lower coefficient of friction than if two flat surfaces were sliding against each other.
Ball bearings tend to have lower load capacity for their size than other kinds of rolling-element bearings due to the smaller contact area between the balls and races. However, they can tolerate some misalignment of the inner and outer races.
MBP use improved ball quality to so to provide noise free bearings and smooth running 
MBP ball bearings have an optimized surface finish on all the contact surfaces to provide the sufficient  lubrications this allows the bearings to run cooler and last longer 

Taper Roller Bearing

Product Specification

The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.>
This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the rollers are the same as their raceways along the whole length of the contact patch and no differential scrubbing occurs. When a roller slides rather than rolls, it can generate wear at the roller-to-race interface, i.e. the differences in surface speeds creates a scrubbing action. Wear will degenerate the close tolerances normally held in the bearing and can lead to other problems. Much closer to pure rolling can be achieved in a tapered roller bearing and this avoids rapid wear.
The rollers are guided by a flange on the inner ring. This stops the rollers from sliding out at high speed due to their momentum.
The larger the half angles of these cones the larger the axial force that the bearing can sustain.
Tapered roller bearings are separable and have the following components: outer ring, inner ring, and roller assembly (containing the rollers and a cage). The non-separable inner ring and roller assembly is called the cone, and the outer ring is called the cup. Internal clearance is established during mounting by the axial position of the cone relative to the cup.

indian roller bearings suppliers

MBP Bearings Pvt. Ltd. is one of the leading manufacturers of hi-precision and hi-quality "MBP BRAND" anti-friction Bearings with exclusive range. Being a highly conscious company, we ensure the offered Taper Roller Bearings, Cylindrical Roller Bearings, Needle Roller Bearings, Spherical Roller Bearings, Angular Contract Bearings, Thrust Bearings, Clutch Release Bearings, SRDG and DRSA Ball Bearings, Pillow Block Bearings and Water Pump Bearings are of the highest standard and are dependable. Quality has always been an integral part and culture of our organization and every effort is made to ensure that the customers get value for their money. Our Plant is certified to ISO 9001:2000.

  With the services of leading technocrats having vast experience in the field of manufacturing bearings and the use of sophisticated modern Machinery & Equipment, MBP Bearings Pvt. Ltd. is maintaining the quality for its products at par with International Standards. Special attention is paid to the internal designing of the bearings and surface finish of the rolling surfaces to create optimum loading conditions and maximum load capacity. Every component manufactured is processed after thorough check on precision measuring equipment. Proper vigilance is kept on incoming raw materials & components. MBP Bearings are manufactured from internationally accepted quality steel , even then in-process matching and final product checking is maintained so that the product that rolls out of the factory has the stamp of quality.